Rohde & Schwarz RTP Series - Page 2175

Remote control commands
R&S
®
RTP
2175User Manual 1337.9952.02 ─ 12
Suffix:
<m>
.
1..4
<n> *
Return values:
<State> OK | UNKNown | INComplete | LENGth
*RST: OK
Usage: Query only
BUS<m>:DDR:RESult:FRAMe<n>:STOP?
Returns the stop time of the frame with the selected frame number (for the selected
serial bus).
Suffix:
<m>
.
1..4
<n> *
Return values:
<Stop> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:DDR:RESult:FRAMe<n>:TYPE?
Returns the frame type for the selected serial bus and frame number.
Suffix:
<m>
.
1..4
<n> *
Return values:
<FrameType> READ | WRITe | RDNC | WRNC | UNKNown
RDNC: read data not continue
WRNC: write data not continue
*RST: UNKNown
Usage: Query only
22.17.24.3 Search settings
There are two commands for each parameter, that you can use for defining the DDR
search settings.
For example, to set the Frame type =Read > Field =Data >Data value you can use one
of the following commands:
Protocols