Rohde & Schwarz RTP Series - Page 2176

Remote control commands
R&S
®
RTP
2176User Manual 1337.9952.02 ─ 12
●
SEARch:TRIGger:DDR:FRAMe1:ENABle:DMIN 01100
Defines the parameter by using the index <m> for the frame number and <n> for
the field number.
●
SEARch:TRIGger:DDR:DMIN "Read", "Data", 01100
Defines the parameter by using the frame and field name.
SEARch:TRIGger:DDR:ERENable.................................................................................2176
SEARch:TRIGger:DDR:ERRor<m>:ENABle................................................................... 2176
SEARch:TRIGger:DDR:FIENable.................................................................................. 2177
SEARch:TRIGger:DDR:FRENable.................................................................................2177
SEARch:TRIGger:DDR:DMAX.......................................................................................2177
SEARch:TRIGger:DDR:FRAMe<m>:FLD<n>:DMAX........................................................2177
SEARch:TRIGger:DDR:DMIN........................................................................................2177
SEARch:TRIGger:DDR:FRAMe<m>:FLD<n>:DMIN.........................................................2177
SEARch:TRIGger:DDR:DOPerator................................................................................ 2178
SEARch:TRIGger:DDR:FRAMe<m>:FLD<n>:DOPerator................................................. 2178
SEARch:TRIGger:DDR:FRENable.................................................................................2178
SEARch:TRIGger:DDR:FRAMe<m>:ENABle.................................................................. 2178
SEARch:TRIGger:DDR:IMAX........................................................................................2179
SEARch:TRIGger:DDR:FRAMe<m>:FLD<n>:IMAX.........................................................2179
SEARch:TRIGger:DDR:IMIN.........................................................................................2179
SEARch:TRIGger:DDR:FRAMe<m>:FLD<n>:IMIN.......................................................... 2179
SEARch:TRIGger:DDR:IOPerator..................................................................................2180
SEARch:TRIGger:DDR:FRAMe<m>:FLD<n>:IOPerator...................................................2180
SEARch:TRIGger:DDR:ERENable <SearchName>,<ErrorName>, <Enabler>
SEARch:TRIGger:DDR:ERRor<m>:ENABle <SearchName>,<Enable>
SEARch:TRIGger:DDR:ERRor<m>:ENABle? <SearchName>
Defines the error type to be searched for. You can search for all error types in parallel.
Suffix:
<m>
.
*
Specifies the error.
Parameters:
<Enable> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName> The following errors are available:
Frame Incomplete
Length Error
Example:
SEARch:TRIGger:DDR:ERRor1:ENABle ON
Enables searching for Frame Incomplete error.
SEARch:TRIGger:DDR:ERENable "Length Error",ON
Enables searching for Length Error.
Protocols