Rohde & Schwarz RTP Series - Page 2177

Remote control commands
R&S
®
RTP
2177User Manual 1337.9952.02 ─ 12
SEARch:TRIGger:DDR:FIENable <SearchName>,<Frame>, <Field>, <Enabler>
Setting parameters:
<SearchName>
<Frame>
<Field>
<Enabler> ON | OFF
Usage: Setting only
SEARch:TRIGger:DDR:FRENable <SearchName>,<Frame>, <Enabler>
Setting parameters:
<SearchName>
<Frame>
<Enabler> ON | OFF
Usage: Setting only
SEARch:TRIGger:DDR:DMAX <SearchName>,<Frame>, <Field>, <Data>
SEARch:TRIGger:DDR:FRAMe<m>:FLD<n>:DMAX <SearchName>,<DataMax>
SEARch:TRIGger:DDR:FRAMe<m>:FLD<n>:DMAX? <SearchName>
Sets the end value of a data pattern range if SEARch:TRIGger:DDR:FRAMe<m>:
FLD<n>:DOPerator is set to INRange or OORange.
Suffix:
<m>
.
*
<n> *
Parameters:
<DataMax>
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:DDR:DMIN <SearchName>,<Frame>, <Field>, <Data>
SEARch:TRIGger:DDR:FRAMe<m>:FLD<n>:DMIN <SearchName>,<DataMin>
SEARch:TRIGger:DDR:FRAMe<m>:FLD<n>:DMIN? <SearchName>
Specifies the data pattern to be searched, or sets the start value of a data pattern
range to be searched.
Suffix:
<m>
.
*
<n> *
Parameters:
<DataMin> Specifies the name of the generic trigger setting frame.
Protocols