Rohde & Schwarz RTP Series - Page 2182

Remote control commands
R&S
®
RTP
2182User Manual 1337.9952.02 ─ 12
Suffix:
<m>
.
*
<n> *
Query parameters:
<SearchName>
Return values:
<State> OK | UNKNown | INComplete | LENGth
*RST: OK
Usage: Query only
SEARch:RESult:DDR:FRAMe<m>:FLD<n>:STOP?
<SearchName>
Returns the stop time of the field with the selected field number within the frame with
the selected frame number within the search result.
Suffix:
<m>
.
*
<n> *
Selects the field number.
Query parameters:
<SearchName>
Return values:
<Stop> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
SEARch:RESult:DDR:FRAMe<m>:FLD<n>:VAL? <SearchName>
Returns the value of the field with the selected field number within the frame with the
selected frame number within the search result.
Suffix:
<m>
.
*
<n> *
Selects the field number.
Query parameters:
<SearchName>
Return values:
<ByteValue> Range: 0 to 0
Increment: 1
*RST: 0
Usage: Query only
Protocols