Rohde & Schwarz RTP Series - Page 2181

Remote control commands
R&S
®
RTP
2181User Manual 1337.9952.02 ─ 12
Return values:
<FrameCount> Range: 0 to 100000
Increment: 1
*RST: 0
Usage: Query only
SEARch:RESult:DDR:FRAMe<m>:FLD<n>:FVAL? <SearchName>
Returns the formatted value of the field with the selected field number within the frame
with the selected frame number within the search result.
Suffix:
<m>
.
*
<n> *
Selects the field number.
Query parameters:
<SearchName>
Return values:
<BteFormattedVal>
Usage: Query only
SEARch:RESult:DDR:FRAMe<m>:FLD<n>:STARt? <SearchName>
Returns the start time of the selected field number within the frame with the selected
frame number within the search result.
Suffix:
<m>
.
*
<n> *
Selects the field number.
Query parameters:
<SearchName>
Return values:
<Start> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
SEARch:RESult:DDR:FRAMe<m>:FLD<n>:STATus? <SearchName>
Returns the field status of the field with the selected field number within the frame with
the selected frame number within the search result.
Protocols