Rohde & Schwarz RTP Series - Page 456

Search functions
R&S
®
RTP
456User Manual 1337.9952.02 ─ 12
Vertical condition
Defines the run of the signal relative to the window, see "Vertical condition"
on page 222.
Remote command:
SEARch:TRIGger:WINDow:RANGe on page 1496
Time condition, Width, ±Delta
Set the time limit for the vertical condition, see:
●
"Time condition" on page 223
●
"Width" on page 223
●
"±Delta" on page 223
Remote command:
SEARch:TRIGger:WINDow:TIMerange on page 1497
SEARch:TRIGger:WINDow:WIDTh on page 1497
SEARch:TRIGger:WINDow:DELTa on page 1496
Upper level, Lower level
Set the upper and lower voltage thresholds. The amplitude of a runt crosses the first
threshold twice in succession without crossing the second one.
Remote command:
SEARch:TRIGger:LEVel:WINDow:UPPer on page 1498
SEARch:TRIGger:LEVel:WINDow:LOWer on page 1498
11.2.2.6 Timeout
The timeout search settings are the same as the timeout trigger settings. To apply the
trigger settings to search, tap Copy from trigger A'.
Search setup