Scanlab RTC6 PCIe Board - Page 1004

RTC6 boards
Doc. Rev. 1.0.21 en-US
21 Appendix F: Change Index
1004
innovators for industry
set_ellipse, page 632 Software change.
(a)
See Version info, page 632.
set_fly_1_axis, page 641 Editorial enhancement. Parameter for scaling factor ignored
for Mode 8, 12, 16, page 641.
set_fly_2_axes, page 642 Editorial enhancement. Parameters for scaling factor ignored
for Mode 8, 12, 16, page 642.
set_fly_3_axes, page 646 Editorial enhancement. Parameters for scaling factor ignored
for Mode 8, 12, 16, page 646.
set_trigger, page 751 Editorial enhancement. New comment, page 759.
set_trigger8, page 761 Software change.
(a)
New command.
store_program, page 800 Software change.
(a)
See Version info, page 800.
Chapter 16.7.1 ”Upgrading BIOS-ETH”,
page 909
Software change.
(a)
Chapter 16.8 ”“High Performance Mode””,
page 916
Software change.
(a)
Further clarification.
Chapter 16.9 ”Remote Interface Mode”,
page 917
Software change.
(a)
New functionality for RTC6 Ethernet
Boards: Remote Interface Mode.
Chapter 19 ”Appendix D: RTC6 Software
Packages – History”, page 939
Software change.
(a)
Chapter 20 ”Appendix E: iDRIVE Scan Systems
– Control Commands and Signals Transmitted
to RTC Boards”, page 941
Software change. Module Rev.1.0.4 en-US.
Appendix F: Change Index, page 984
(a) See also RTC6_Software_RevisionHistory_<Date>_<Rev>.pdf .
Where
(cont’d.)
What
(cont’d.)