Scanlab RTC6 PCIe Board - Page 924

RTC6 boards
Doc. Rev. 1.0.21 en-US
16 Appendix A: The RTC6 Ethernet Board
924
innovators for industry
16.11Technical Specifications
– RTC6 Ethernet Board
System Requirements
Windows PC with Ethernet interface
(Gigabit Ethernet (preferred), 10/100 Mbit/s
Ethernet)
Operating system Microsoft Windows 10, 8,
7 as 32 bit or 64 bit
version.
Dimensions
(without plugged-in plug connectors)
Length 120 mm
Width 103 mm
Height Approx. 30 mm
Other Connections and Specifications
Voltage supply +11 V…+50 V
Maximum power
consumption, no
peripherals attached
< 10 W
In order to minimize power loss, a low input
voltage should be selected.
Operating temperature
• with natural
convection
10 °C…50 °C
• with forced
convection
10 °C…60 °C
The user must ensure sufficient cooling of the
RTC6 Ethernet Board.
Standalone
functionality
Yes, see Chapter 16.7
”Standalone Functionality
”, page 908.
Interface to the Network
Ethernet Gigabit Ethernet
(preferred), 10/100 Mbit/s
Ethernet
IP address obtaining • By a DHCP server
• Link-local address
(as of BIOS 24)
(a)
• Static IP address
(storable on the board)
(a) See page 899.
Required local ports
(b)
(b) Configurable by eth_set_port_numbers.
• 63749 (UDP)
• 63750 (UDP, TCP)
Scan System Control
Number of RTC6 List
Memory areas
Up to 3, configurable
Total capacity of the
RTC6 List Memory
8,388,608 list positions
Output interval of
Microsteps
10 µs
Maximum value range
for the Image Field
coordinates
–524,288…+524,287
(20 bit, signed)
Virtual Image Field, e.g.
for
Processing-on-the-fly
–268,435,456…
+268,435,455
(28 bit, signed
= 29 bit)
(a)
(a) With RTC6 Software Package  1.4.0.