Extreme Networks EAS 100-24t Switch CLI - Page 234

Chapter 8: Access Control List (ACL)
Extreme Networks EAS 100-24t Switch CLI Manual
234
Example usage:
To display all of the currently configured access profiles on the switch:
Parameters profile_id <value 1-256> – Specify the profile id to display only the access
rules configuration for a single profile ID. The user may enter a profile ID
number between 1 and 256.
Restrictions None.
#show access_profile
Command: show access_profile
Access Profile Table
Profile ID: 101 Type: IPv4 Frame Filter – ICMP
Masks Option
VLAN Source IP Dest. IP DSCP Prot
---------------- --------------- --------------- ---- ----
0xFFF 20.0.0.0 10.0.0.0 ICMP
Total Profile Entries: 1
Total Used Rule Entries: 0
Total Unused Rule Entries: 256
#
show access_profile