Extreme Networks EAS 100-24t Switch CLI - Page 316

Appendix A: System Log Entries
Extreme Networks EAS 100-24t Switch CLI Manual
316
Port shutdown due to a
packet storm
Port <portNum> is currently shutdown due to a
packet storm
Warning
Configuration Testing
Protocol detects a loop in
port
Configuration Testing Protocol detects a loop
in port <portNum>
Informational
802.1x VID assigned from RADIUS
server after RADIUS client
is authenticated by
RADIUS server
successfully.This VID will
be assigned to the port and
this port will be the VLAN
untagged port member.
Radius server <ipaddr> assigned VID:
<vlanid> to Port <portNum> (Account:
<username>)
Informational
802.1x Authentication
failure
802.1x Authentication failure from (Username:
<username>, Port <portNum>, MAC:
<macaddr>)
Warning
802.1x Authentication
failure for the radius server
timeout
802.1x Authentication failure for the radius
server <ipaddr> timeout from (Username:
<username>, Port <portNum>, MAC:
<macaddr>)
Warning
802.1x Authentication
failure for the 802.1X client
session timeout
802.1x Authentication failure for the 802.1X
client session timeout from (Username:
<username>, Port <portNum>, MAC:
<macaddr>)
Warning
802.1x Authentication
success
802.1x Authentication success from
(Username: <username>, Port <portNum>,
MAC: <macaddr>)
Informational
MAC-based
Access Control
MAC-based Access Control
host login successful
MAC-based Access Control host login
successful (MAC: <macaddr>, port:
<portNum>, VID: <vlanid>)
Informational
MAC-based Access Control
unauthenticated host
MAC-based Access Control unauthenticated
host(MAC: <macaddr>, Port: <portNum>, VID:
<vlanid>)
Critical
MAC-based Access Control
host aged out
MAC-based Access Control host aged out
(MAC: <macaddr>, port: <portNum>, VID:
<vlanid>)
Informational
Loopback
Detection
Port recovers from
Loopback Detection
err-disabled state manually.
Port <portNum> recovers from Loopback
Detection err-disabled state manually.
Informational
Port recovers from
Loopback Detection
err-disabled state
automatically.
Port <portNum> recovers from Loopback
Detection err-disabled state automatically.
Informational
Category
Event Description Log Content
Severity