5.1.2 Disabling SVOM boot watchdog functionality
The ServerView Operations Manager boot watchdog determines whether the
server boots within a preset time frame. If the watchdog timer expires, the
system will automatically reboot.
5.1.2.1 Viewing boot watchdog settings
Viewing boot watchdog settings in the BIOS
Ê Enter the BIOS.
Ê Select the Server Mgmt menu.
Ê Under Boot Watchdog, you can obtain detailed information about the current
watchdog status, time out intervals and actions that are triggered if
watchdog time outs are exceeded.
I For detailed information on BIOS settings, refer to the corresponding
BIOS Setup Utility reference manual.
Viewing boot watchdog settings in the iRMC web frontend
Ê Enter the ServerView iRMC web frontend.
Ê Select the Server Management menu.
Ê Under Watchdog Settings, you can obtain detailed information about the
current watchdog status, time out intervals and actions that are triggered if
watchdog time outs are exceeded.
I For detailed information on iRMC settings, refer to the "Integrated
Remote Management Controller" user guide.
Viewing boot watchdog settings in ServerView Operations Manager
Ê In ServerView Operations Manager Single System View select Maintenance
from the Information / Operation menu.
Ê Under ASR&R select the Watchdog tab to obtain detailed information about
the current watchdog status, time out intervals and actions that are triggered
if watchdog time outs are exceeded.
I For more detailed information, refer to the "ServerView Operations
Manager - Server Management" user guide.
To Next Page
Loading...
