14.3.3.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 125
Ê "Locating the defective server" on page 57
Ê "Shutting down the server" on page 62
Ê "Disconnecting the server from the mains" on page 63
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê Open the side / top cover as described in section "Opening the server" on
page 68.
Ê "Removing the system air duct" on page 81
Ê "Removing the system fan holder" on page 330
14.3.3.2 Removing the TPM board
Ê Remove the TPM board as described in section "Removing the TPM board"
on page 666.
Ê Leave the TPM spacer on the system board when removing the defective
TPM board.
14.3.3.3 Reinstalling the TPM board
Figure 525: TPM spacer
To Next Page
Loading...
Need help?
General