Fujitsu PRIMERGY RX350 S8 User Manual

TX300 S8 / RX350 S8 Upgrade and Maintenance Manual 765
Cabling
16.3.3 Installing the intrusion switch cable
Figure 606: Attaching a rubber bumper to the front intrusion switch
I In case of rack server configurations, a rubber bumper needs to be
attached to the front intrusion switch as described below. When working
on a tower server, please skip this step.
Ê Attach a rubber bumper (C26192-Y26-C43) to the front intrusion switch as
shown.

Fujitsu PRIMERGY RX350 S8 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX350 S8
Category	Server
Language	English