8.3.1.3 Concluding steps
Ê "Closing the server" on page 98
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
Ê Reconnect all external cables to the server rear.
Ê "Connecting the server to the mains" on page 118
Ê Switch on the server.
Ê "Performing a fan test after replacing a defective fan" on page 145
8.3.2 Removing rear fan modules
8.3.2.1 Preliminary steps
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê Open the side / top cover as described in section "Opening the server" on
page 68.
Customer Replaceable Unit
(CRU)
Average task duration:
5 minutes
Tools: tool-less
To Next Page
Loading...
