8.2 System fans
8.2.1 Replacing system fan modules
8.2.1.1 Preliminary steps
Ê "Locating the defective server" on page 57
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê Open the side / top cover as described in section "Opening the server" on
page 68.
Ê Locate the defective fan using the onboard Local Diagnostic LEDs as
described in section "Onboard indicators and controls" on page 779.
Customer Replaceable Unit
(CRU)
Average task duration:
5minutes
Tools: tool-less
To Next Page
Loading...
Need help?
General