16.3 Replacing the intrusion switch cable
16.3.1 Preliminary steps
Ê "Locating the defective server" on page 57.
Ê "Shutting down the server" on page 62.
Ê "Disconnecting the server from the mains" on page 63.
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê Open the side / top cover as described in section "Opening the server" on
page 68.
Ê "Removing the system air duct" on page 81.
Ê "Removing the system fan holder" on page 330.
Field Replaceable Unit
(FRU)
Average task duration:
10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
To Next Page
Loading...
