13.2 Front LAN connector
13.2.1 Installing the front LAN connector
13.2.1.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 125
Ê "Locating the defective server" on page 57
Ê "Shutting down the server" on page 62
Ê "Disconnecting the server from the mains" on page 63
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê Bring the server to its horizontal position.
Ê "Opening the server" on page 68
Ê "Removing the system air duct" on page 81
Ê "Removing the system fan holder" on page 330
13.2.1.2 Removing the front panel module
Ê "Removing front panel cables from the system board" on page 603
Ê "Removing the front panel module" on page 605
13.2.1.3 Preparing the front panel module
Ê "Removing the front panel module cover" on page 608
Upgrade and Repair Unit
(URU)
Average task duration:
10 minutes
Tools: Slotted screw driver for breaking out the front LAN cover plate
To Next Page
Loading...
