14.4.2.2 Removing onboard SAS enabling key
Figure 529: Onboard SAS enabling key mounting location
Ê Firmly pull up on the release lash until the onboard SAS enabling key pops
out of its connector.
14.4.2.3 Concluding steps
Ê "Installing the system air duct" on page 83
Ê "Closing the server" on page 98
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
Ê "Connecting the server to the mains" on page 118
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task: "Resuming BitLocker functionality" on page 152
To Next Page
Loading...
