TX300 S8 / RX350 S8 Upgrade and Maintenance Manual 529
12 Accessible drives
This chapter provides information on how to install, remove or replace SATA
optical disk drives (ODDs), SAS / USB backup drives and the Local Service
Display (LSD).
Safety notes
V CAUTION!
● Before installing an accessible drive, acquaint yourself with the
drive's user documentation.
● When inserting an accessible drive into the server, ensure not to
pinch or strain any connected cables.
● When installing an accessible drive, hold it by its sides. Applying force
to the top of the casing may cause failures.
● When disposing of, transferring, or returning a backup drive, ensure
that all backup media has been removed from the drive.
● Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
● Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).
● For further safety information, please refer to chapter "Important
information" on page 45.
To Next Page
Loading...
