7.4.8.5 Installing HDD modules into the 8x 2.5-inch HDD extension box
Ê "Closing the server" on page 98
Ê Install HDD modules or HDD dummy modules into the additional HDD slots
as described in sections "Installing a 2.5-inch HDD / SSD module" on
page 208 and "Installing a 2.5-inch HDD / SSD dummy module" on
page 213.
I For detailed information on HDD mounting order, refer to section "2.5-
inch HDD / SSD configurations" on page 185.
7.4.8.6 Concluding steps
Ê "Installing the system fan holder" on page 331
Ê "Installing the system air duct" on page 83
Ê "Closing the server" on page 98
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
Ê "Connecting the server to the mains" on page 118
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task: "Resuming BitLocker functionality" on page 152
To Next Page
Loading...
Need help?
General