TX300 S8 / RX350 S8 Upgrade and Maintenance Manual 33
2 Before you start
Before you start any upgrade or maintenance task, please proceed as follows:
Ê Carefully read the safety instructions in chapter "Important information" on
page 45.
Ê Make sure that all necessary manuals are available. Refer to the
documentation overview in section "Documents you need at hand" on
page 41. Print the PDF files if required.
Ê Make yourself familiar with the procedure categories introduced in section
"Classification of procedures" on page 35.
Ê Ensure that all required tools are available according to section "Tools you
need at hand" on page 39.
Installing optional components
Your server’s operating manual gives an introduction to server features and
provides an overview of available hardware options.
Use the Fujitsu ServerView Suite management software and iRMC web
frontend to prepare hardware expansions. ServerView Suite documentation is
available online at http://manuals.ts.fujitsu.com (for the Japanese market:
http://jp.fujitsu.com/platform/server/primergy/manual/). Please refer to the
following ServerView Suite topics:
– Operation
– Virtualization
– Tools for Service & Diagnostics
– Out-Of-Band Management
I For the latest information on hardware options, refer to your server’s
hardware configurator available online at the following address:
for the EMEA market:
http://ts.fujitsu.com/products/standard_servers/index.htm
for the Japanese market:
http://jp.fujitsu.com/platform/server/primergy/system/
To Next Page
Loading...
