TX300 S8 / RX350 S8 Upgrade and Maintenance Manual
Inhalt
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2 Before you start . . . . . . . . . . . . . . . . . . . . . . . . 33
2.1 Classification of procedures . . . . . . . . . . . . . . . . . 35
2.1.1 Customer Replaceable Units (CRU) . . . . . . . . . . . . . . . 35
2.1.2 Upgrade and Repair Units (URU) . . . . . . . . . . . . . . . . 36
2.1.3 Field Replaceable Units (FRU) . . . . . . . . . . . . . . . . . 37
2.2 Average task duration . . . . . . . . . . . . . . . . . . . . . 38
2.3 Tools you need at hand . . . . . . . . . . . . . . . . . . . . 39
2.4 Documents you need at hand . . . . . . . . . . . . . . . . . 41
3 Important information . . . . . . . . . . . . . . . . . . . . . 45
3.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 45
3.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 53
3.3 FCC Class A Compliance Statement . . . . . . . . . . . . . 53
3.4 Environmental protection . . . . . . . . . . . . . . . . . . . 54
4 Basic hardware procedures . . . . . . . . . . . . . . . . . . 57
4.1 Using diagnostics information . . . . . . . . . . . . . . . . 57
4.1.1 Locating the defective server . . . . . . . . . . . . . . . . . . 57
4.1.2 Determining the error class . . . . . . . . . . . . . . . . . . . 58
4.1.2.1 Global Error indicator . . . . . . . . . . . . . . . . . . . . 59
4.1.2.2 Customer Self Service (CSS) indicator . . . . . . . . . . . 60
4.1.3 Locating the defective component . . . . . . . . . . . . . . . . 60
4.1.3.1 Local diagnostic indicators on the front . . . . . . . . . . . 60
4.1.3.2 Local diagnostic indicators on the system board . . . . . . . 61
4.2 Shutting down the server . . . . . . . . . . . . . . . . . . . 62
4.3 Disconnecting the server from the mains . . . . . . . . . . 63