Fujitsu PRIMERGY RX350 S8 User Manual

462 Upgrade and Maintenance Manual TX300 S8 / RX350 S8
Expansion cards and backup units
Figure 354: Removing the FBU from the FBU holder
Ê At a slight angle, slide the FBU from under the retaining brackets of the FBU
holder and remove it.
9.6.7.4 Installing a new FBU module
Ê Install the new FBU into the FBU holder as described in section "Preparing
the FBU" on page 447.
Ê Install the FBU holder into the chassis as described in section "Installing the
FBU holder into the chassis" on page 449.
Ê Connect the FBU to the controller.

Fujitsu PRIMERGY RX350 S8 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX350 S8
Category	Server
Language	English