Fujitsu PRIMERGY RX350 S8

22 Upgrade and Maintenance Manual TX300 S8 / RX350 S8
Inhalt
12 Accessible drives . . . . . . . . . . . . . . . . . . . . . . . 529
12.1 Basic information . . . . . . . . . . . . . . . . . . . . . . . 530
12.2 Installing accessible drives . . . . . . . . . . . . . . . . . . 533
12.2.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 533
12.2.2 Removing accessible drive dummy covers . . . . . . . . . . . 533
12.2.3 Installing an accessible drive . . . . . . . . . . . . . . . . . . 534
12.2.3.1 Installing an ODD / backup drive . . . . . . . . . . . . . . 534
12.2.3.2 Installing mounting brackets to RDX and DAT72
backup drives . . . . . . . . . . . . . . . . . . . . . . . . 535
12.2.4 Cabling the accessible drive . . . . . . . . . . . . . . . . . . 539
12.2.4.1 SATA ODD . . . . . . . . . . . . . . . . . . . . . . . . . 539
12.2.4.2 USB backup drive . . . . . . . . . . . . . . . . . . . . . . 541
12.2.4.3 SAS backup drives with separate power supply . . . . . . 543
12.2.4.4 SAS backup drives with SAS power supply . . . . . . . . . 545
12.2.5 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 546
12.3 Removing accessible drives . . . . . . . . . . . . . . . . . 546
12.3.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 546
12.3.2 Removing an accessible drive . . . . . . . . . . . . . . . . . 547
12.3.3 Installing accessible drive dummy covers . . . . . . . . . . . 548
12.3.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 548
12.4 Replacing accessible drives . . . . . . . . . . . . . . . . . 549
12.4.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 549
12.4.2 Removing an accessible drive . . . . . . . . . . . . . . . . . 549
12.4.3 Installing an accessible drive . . . . . . . . . . . . . . . . . . 550
12.4.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 550
12.5 Slimline ODD and LSD in Multibay box . . . . . . . . . . . 550
12.5.1 Installing the slimline ODD or LSD . . . . . . . . . . . . . . . 550
12.5.1.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 551
12.5.1.2 Installing the slimline ODD into the Multibay box . . . . . . 551
12.5.1.3 Installing the LSD module into the Multibay box . . . . . . 555
12.5.1.4 Removing accessible drive dummy covers . . . . . . . . . 556
12.5.1.5 Installing the Multibay box . . . . . . . . . . . . . . . . . . 557
12.5.1.6 Cabling the slimline ODD and LSD . . . . . . . . . . . . . 559
12.5.1.7 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 560
12.5.2 Removing a slimline ODD or LSD . . . . . . . . . . . . . . . 561
12.5.2.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 561
12.5.2.2 Removing the Multibay box . . . . . . . . . . . . . . . . . 562
12.5.2.3 Removing the slimline ODD from the Multibay box . . . . . 563
12.5.2.4 Removing the LSD module from the Multibay box . . . . . 565