Fujitsu PRIMERGY RX350 S8

TX300 S8 / RX350 S8 Upgrade and Maintenance Manual 29
Inhalt
16.2.8 SAS cabling with 8x 3.5-inch HDDs and
2x 3.5-inch HDD extension box . . . . . . . . . . . . . . . . . 745
16.2.9 SAS cabling with 8x 3.5-inch HDDs and
4x 3.5-inch HDD extension box . . . . . . . . . . . . . . . . . 746
16.2.10 Power cabling with 8x 2.5-inch HDDs / SSDs and
SAS expander board . . . . . . . . . . . . . . . . . . . . . . 747
16.2.11 Power cabling with 8x 2.5-inch HDDs / SSDs and
accessible drives . . . . . . . . . . . . . . . . . . . . . . . . 748
16.2.12 Power cabling with 16x / 24x 2.5-inch HDDs / SSDs and
backup drives . . . . . . . . . . . . . . . . . . . . . . . . . . 749
16.2.13 SAS 2.0 cabling with 8x 2.5-inch SAS 2.0 HDDs / SSDs and
two SAS 3.0 backplanes . . . . . . . . . . . . . . . . . . . . . 750
16.2.14 SAS 3.0 cabling with 8x 2.5-inch SAS 3.0 SSDs and
two SAS 3.0 backplanes . . . . . . . . . . . . . . . . . . . . . 750
16.2.15 SAS 2.0 cabling with 16x 2.5-inch HDDs / SSDs and
two SAS controllers . . . . . . . . . . . . . . . . . . . . . . . 751
16.2.16 SAS 3.0 / 2.0 cabling with 16x 2.5-inch HDDs / SSDs and
two SAS controllers . . . . . . . . . . . . . . . . . . . . . . . 752
16.2.17 SAS 2.0 cabling with 16x 2.5-inch HDDs / SSDs,
one SAS controller and SAS expander board . . . . . . . . . . 753
16.2.18 SAS 2.0 cabling with 24x 2.5-inch HDDs / SSDs,
two SAS controllers and SAS expander board . . . . . . . . . 754
16.2.19 SAS 3.0 / 2.0 cabling with 24x 2.5-inch HDDs / SSDs,
two SAS controllers, SAS expander board . . . . . . . . . . . 755
16.2.20 SAS 2.0 cabling with 24x 2.5-inch HDDs / SSDs,
one SAS controller and SAS expander board . . . . . . . . . . 756
16.2.21 Cabling of standard GPGPU / coprocessor cards . . . . . . . . 757
16.2.22 Cabling of high performance GPGPU / coprocessor cards . . . 758
16.2.23 SAS 2.0 BBU / FBU cabling . . . . . . . . . . . . . . . . . . . 759
16.2.24 SAS 3.0 FBU cabling . . . . . . . . . . . . . . . . . . . . . . 760
16.2.25 Modular LAN NCSI sideband cabling . . . . . . . . . . . . . . 760
16.3 Replacing the intrusion switch cable . . . . . . . . . . . . . 761
16.3.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 761
16.3.2 Removing the intrusion switch cable . . . . . . . . . . . . . . 762
16.3.3 Installing the intrusion switch cable . . . . . . . . . . . . . . . 765
16.3.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 768