HEIDENHAIN MANUALPLUS 620 - Page 487

January 2012 4.10 List of Machine Parameters 487
CfgSimWindowSize
Specification of the standard window size
zeroPosX
115201
Zero position in X
Defines the distance of the coordinate origin
referenced to the lower window.
Format: Numerical value
Input: –100 000.000 to 100 000 [mm]
Default: –100
PLC/Pgm
run is
locked
LEVEL1
1425
zeroPosZ
115202
Zero position in Z
Defines the distance of the coordinate origin
referenced to the left-hand window.
Format: Numerical value
Input: –100 000.000 to 100 000 [mm]
Default: –150
PLC/Pgm
run is
locked
LEVEL1
1425
deltaX
115203
Delta X
Defines the vertical expansion of the graphics
window.
Format: Numerical value
Input: 0.000 to 100 000 [mm]
Default: 200
PLC/Pgm
run is
locked
LEVEL1
1425
deltaZ
115204
Delta Z
Defines the horizontal expansion of the graphics
window.
Format: Numerical value
Input: 0.000 to 100 000 [mm]
Default: 200
PLC/Pgm
run is
locked
LEVEL1
1426
Parameter
MP number
iTNC MP number
Function and input Behavior
Access
SW vers.
Page