c. Swipe down the dashboard and press , then scroll down the menu and press Reports >.Print
Quality Report. The print-quality diagnostic page prints.
2. If the lines in Test Pattern 1 are not straight and connected, follow these steps to align the printer:
a. Make sure there is plain white, letter-size paper loaded in the sheet feeder on the back of the
printer.
b. Swipe down the dashboard and press , then scroll down the menu and press Printer Maintenance
>.Align Printhead. The printhead alignment procedure will begin.
c. At the end of the process a page prints, which may be discarded.
3. Examine the Test Pattern 2. Shown here is a good example of the test pattern.
If any of the colored blocks in Test Pattern 2 show white lines, or are faded or missing completely, follow
these steps to clean the printhead.
a. Make sure there is plain white, letter-size paper loaded in the sheet feeder on the back of the
printer.
134 Chapter 2 Troubleshooting ENWW
To Next Page
Loading...
