Update the rmware from the HP (Designjet) Utility
1. Launch the HP Designjet Utility under Windows or the HP Utility under Mac OS.
2. Go to the Admin tab.
3. Download the rmware upgrade le.
4. Click Select File and a pop-up window to select the rmware upgrade le will appear.
5. Select the le (*.ful2) and click Open button. Then the Upload File button will be enabled. Click it to start
the rmware upgrade.
6. Once the le has been sent, a new pop-up is displayed.
ENWW Update the rmware 179
To Next Page
Loading...
