Keysight Technologies P Series

Keysight N8262A P-Series Modular Power Meter
Programming Guide
241
5 DISPlay Subsystem
DISPlay Subsystem 242
DISPlay:ENABle <boolean> 243
DISPlay:SCReen:FORMat <character_data> 245
DISPlay[:WINDow[1]|2] Commands 247
DISPlay[:WINDow[1]|2]:ANALog Commands 248
DISPlay[:WINDow[1]|2]:ANALog:LOWer <numeric_value> 249
DISPlay[:WINDow[1]|2]:ANALog:UPPer <numeric_value> 252
DISPlay[:WINDow[1]|2]:FORMat <character_data> 255
DISPlay[:WINDow[1]|2]:METer Commands 258
DISPlay[:WINDow[1]|2]:METer:LOWer <numeric_value> 259
DISPlay[:WINDow[1]|2]:METer:UPPer <numeric_value> 262
DISPlay[:WINDow[1]|2][:NUMeric[1]|2]:RESolution <numeric_value> 265
DISPlay[:WINDow[1]|2]:SELect[1]|2 267
DISPlay[:WINDow[1]|2][:STATe] <boolean> 269
DISPlay[:WINDow[1]|2]:TRACe:FEED <character_data> 271
This chapter explains how the DISPlay subsystem is used to control the selection
and presentation of the windows used on the power meter’s display.