Keysight Technologies P Series

SENSe Subsystem 10
Keysight N8262A Programming Guide 379
[SENSe[1]]|SENSe2:CORRection:FDOFfset|GAIN4[:INPut]
[:MAGNitude]?
This command is used to return the frequency dependent offset currently being
applied.
Syntax
Example
Reset Condition
On reset, the frequency dependent offset is not affected.
CORR:GAIN4? This command queries the current frequency
dependent offset being applied to Channel A.
SENS
1
:GAIN4
CORR
SENS2
:
:FDOFfset
:INP
:MAG
?