10 SENSe Subsystem
380 Keysight N8262A Programming Guide
[SENSe[1]]|SENSe2:CORRection:GAIN2 Commands
These commands provide a simple correction to a measurement for an external
gain/loss.
The following commands are detailed in this section:
[SENSe[1]]|SENSe2:CORRection:GAIN2:STATe <boolean>
[SENSe[1]]|SENSe2:CORRection:GAIN2[:INPut][:MAGNitude]
<numeric_value>
To Next Page
Loading...
