Keysight Technologies P Series

10 SENSe Subsystem
402 Keysight N8262A Programming Guide
[SENSe[1]]|SENSe2:TRACe:OFFSet:TIME <numeric_value>
This command sets the delay between the delayed trigger point and the start of
the trace for P-Series sensors are set to NORMal mode.
Syntax
Parameters
Example
SENS
1
:TIME
SENS2
:
numeric_value
DEF
Space
TRAC
?
:OFFS
Item Description/Default Range of Values
numeric_value The length of the delay in seconds.
– DEF: the default value is 0 seconds
Units are resolved to 1 ns.
–1 to 1 second
DEF
SENS:TRAC:OFFS:TIME TIME 0.05 This command sets the delay to 0.05
seconds.