Keysight Technologies P Series

10 SENSe Subsystem
404 Keysight N8262A Programming Guide
[SENSe[1]]|SENSe2:TRACe:TIME <numeric_value>
This command sets the duration of the trace for a P-Series sensor set to NORMal
mode.
Syntax
Parameters
Example
SENS
1
SENS2
:
numeric_value
DEF
Space
TRAC
:TIME
?
Item Description/Default Range of Values
numeric_value The duration of the trace in seconds.
– DEF: the default value is 100 µs.
Units are resolved to 1 ns.
10 µs to 1 second
DEF
SENS2:TRAC:TIME 0.5 This command sets the duration of the trace
to 0.5 seconds for Channel B.