Keysight Technologies P Series User Manual

SENSe Subsystem 10
Keysight N8262A Programming Guide 405
Reset Condition
On reset, the duration is set to 100 µs.
Query
SENSe[1]]|SENSe2:TRACe:TIME?
The query returns the current duration of the trace.
Query Example
Error Messages
– If the command is used when a sensor other than a P-Series power sensor is
connected, error –241, “Hardware missing” occurs
SENS2:TRAC:TIME? This command queries the current duration
of the trace.

Keysight Technologies P Series Specifications

General

Brand	Keysight Technologies
Model	P Series
Category	Measuring Instruments
Language	English