10 SENSe Subsystem
406 Keysight N8262A Programming Guide
[SENSe[1]]|SENSe2:TRACe:UNIT <character_data>
This command sets the units for the trace for the specified channel.
Syntax
Parameters
Example
Reset Condition
On reset the units are set to dBm.
SENS
:TRAC
Space
character_data
?
1
2
:UNIT
Item Description/Default Range of Values
character_data – DBM: dBm
–W: Watts
DBM
W
SENS2:TRAC:UNIT W This command sets the trace units for
Channel B to Watts.
To Next Page
Loading...
