Keysight Technologies P Series

SYSTem Subsystem 12
Keysight N8262A Programming Guide 479
TRIG[:SEQ]:LEV 0 dB Power level
TRIG[:SEQ]:LEV:AUTO ON Enable automatic setting of trigger level
TRIG[:SEQ]:SLOP POS Trigger event recognized on rising edge
TRIG[:SEQ[1]|2]:COUN 1 Trigger events for measurement cycle
TRIG[:SEQ[1]|2]:DEL:AUTO ON Enable settling time delay
TRIG[:SEQ[1]|2]:SOUR IMM Trigger source set up
UNIT:POW dBm Power units
UNIT:POW:RAT dB Ratio units
Table 12-1 DEFault: Power meter presets (continued)
Command Setting Comments