Keysight Technologies P Series - Page 537

Keysight N8262A P-Series Modular Power Meter
Programming Guide
537
13 TRACe Subsystem
TRACe Subsystem 538
TRACe[1]|2[:DATA]? <character_data> 540
TRACe[1]|2:DEFine:DURation:REFerence<numeric_value> 542
TRACe[1]|2:DEFine:TRANsition:REFerence <numeric_value>,
<numeric_value> 544
TRACe[1]|2:MEASurement:INSTant:REFerence? <numeric_value> 546
TRACe[1]|2:MEASurement:PULSe[1]|...|10:DURation? 548
TRACe[1]|2:MEASurement:PULSe[1]|...|10:PERiod? 550
TRACe[1]|2:MEASurement:PULSe[1]|...|10:SEParation? 552
TRACe[1]|2:MEASurement:TRANsition[1]|...|10:NEGative:DURation? 554
TRACe[1]|2:MEASurement:TRANsition[1]|...|10:NEGative:OCCurrence? 555
TRACe[1]|2:MEASurement:TRANsition[1]|...|10:POSitive:DURation? 556
TRACe[1]|2:MEASurement:TRANsition[1]|...|10:POSitive:OCCurrence? 557
TRACe[1]|2:MEASurement:REFerence? <numeric_value> 558
TRACe[1]|2:STATe <boolean> 560
TRACe[1]|2:UNIT <character_data> 562
This chapter explains how to use the TRACe command subsystem to configure and
read back the measured power trace.