Keysight Technologies P Series User Manual

14 TRIGger Subsystem
566 Keysight N8262A Programming Guide
TRIGger Subsystem
The TRIGger subsystem is used to synchronize device actions with events. It
includes the ABORt, INITiate and TRIGger commands. These are all at the root
level in the command hierarchy but they are grouped here because of their close
functional relationship.
Keyword Parameter Form Notes Page
ABORt[1]|2 [no query]
[non-SCPI]
page 568
INITiate[1]|2
:CONTinuous <boolean> page 570
[:IMMediate] [no query] page 572
INITiate
:CONTinuous
:ALL <boolean> page 573
:SEQuence[1]|2 <boolean> page 575
[:IMMediate]
:ALL [no query] page 577
:SEQuence[1]|2 [no query] page 578
TRIGger[1]|2
:DELay
:AUTO <boolean> page 580
[:IMMediate] [no query] page 582
:SOURce BUS|EXTernal|HOLD|
IMMediate|INTernal[[1]|2]
page 583
TRIGger
[:SEQuence]
:DELay <numeric_value> page 586
:HOLDoff <numeric_value> page 588

Keysight Technologies P Series Specifications

General

Brand	Keysight Technologies
Model	P Series
Category	Measuring Instruments
Language	English