Lucent Technologies FT-2000 OC-48 - Page 1139

365-575-102 Operation and Maintenance: IXL-001
Issue8.0,July2002 Page1of4
FT-2000 MULTIPLEXER
Trouble Clearing Task Index
FIND YOUR JOB IN THE LIST BELOW . . . . . . . . . .THEN GO TO
Address‘CPResetinProgress’...................................TAP-151
Address‘ExtraTrafficPreempted’..................................TAP-143
Address ‘Inc. (from OC3) DCC Failure’ or Address ‘Inc. (from OC12)
DCCFailure’..................................................TAP-169
Address‘Incoming(FromOC-48)DS3AIS’..........................TAP-109
Address‘LineFERF’or‘IncomingOC-48LineRFI/Yellow’ ..............TAP-121
Address ‘Path AIS’, ‘Path Yellow’, ‘Incoming (from OC-48)
DS3 LOF’, ‘Inc(from STSX) Line RFI/Yellow’, ‘Inc(from OC48)
Path RFI/Yellow’, ‘Incoming OC3 Line RFI/Yellow’, and ‘Incoming
OC12LineRFI/Yellow’ ..........................................TAP-122
Address‘ResetinProgress’......................................TAP-124
Address‘TGWarmingUp’........................................TAP-154
Address‘TIDAddressMapFull’...................................TAP-170
Address‘TL-1LinkFailure’.......................................TAP-106
Address ‘Traffic Squelched’.......................................TAP-146
AddressanUnexplainedLossofService............................TAP-166
AddressConditionatRemoteRepeaterBay/Shelf.....................TAP-147
Address Environmental Input Condition .............................TAP-107
AddressIncomingSignalFailure ..................................TAP-110
Address Missing or Incorrect Response .............................TAP-108
Clear(OpticalParameter)‘Out-of-Range’............................TAP-135
Clear ‘APS Channel Failure’ ......................................TAP-105
Clear‘APSProvisioningConflict’ ..................................TAP-150
Clear ‘Circuit Audit Suspended’ . ..................................TAP-161
Clear ‘Circuit Pack Failure’ .......................................TAP-111
Clear ‘Circuit Pack Removed’ . . . ..................................TAP-112
Clear ‘Circuit Provisioning Error’ . ..................................TAP-162