Lucent Technologies FT-2000 OC-48 - Page 1140

IXL-001: Operation and Maintenance 365-575-102
Page2of4 Issue8.0,July2002
FT-2000 MULTIPLEXER
FIND YOUR JOB IN THE LIST BELOW. . . . . . . . . . THEN GO TO
Clear ‘Clock Out of Range’ . ..................................... TAP-134
Clear‘CP(UnknownType)Failure’................................ TAP-123
Clear‘CP(UnknownType)Removed’.............................. TAP-148
Clear‘CPYPGM:IP(tid)’......................................... TAP-159
Clear ‘DCC Startup in Progress’ . . ................................ TAP-129
Clear ‘DS3 Path Unequipped’ ....................................TAP-156
Clear‘DS-NENotReachable’....................................TAP-137
Clear ‘Duplicate Node ID Defined’ or ‘Duplicate TID Defined’. . . ......... TAP-138
Clear‘ExcessiveHoldover’...................................... TAP-117
Clear‘FanFailure’............................................. TAP-118
Clear ‘FT-LBA (Condition)’. . ..................................... TAP-157
Clear‘Fuse/PowerFailure’....................................... TAP-119
Clear‘Inc.(FromOC48)SyncRefFail’............................. TAP-152
Clear‘Incoming(FromOC-48)STSLOP’...........................TAP-174
Clear‘IncomingDCCFailure’or‘Inc.(FromOC48)DCCFailure’.........TAP-120
Clear‘IncomingOC3APSByteFail’or‘IncomingOC12APSByteFail’....TAP-160
Clear‘IncomingOC-48APSByteFail’ ............................. TAP-132
Clear‘IncomingOC48APSDefaultByte’........................... TAP-168
Clear‘IncomingOC-48InvalidFByte’.............................. TAP-145
Clear‘LCLANFailure’ .......................................... TAP-175
Clear ‘Multiple DS-NEs Defined’ . . ................................TAP-139
Clear‘NEStatusCommFailure’ ..................................TAP-172
Clear‘NodeIDConflict’.........................................TAP-140
Clear‘OC3/OC12ModeConflict(Equipment,SlotPair,X-Connect)’......TAP-158
Clear‘PathIntegrityFailure’...................................... TAP-163
Clear‘PathTCA’,‘SectionTCA’,or‘LineTCA’ ....................... TAP-144
Clear ‘Ring Incomplete/Open’ ....................................TAP-141
Clear ‘Ring Startup in Progress’. . . ................................ TAP-142
Clear‘SiteProvisioningConflict’.................................. TAP-130