3.11 Attache Case
When storing the SJ-410, use the supplied attache case to protect it. All of the standard
accessories, such as the display unit, drive unit, height/tilt adjustment unit, and power
cable, can be stored in the attache case.
When carrying the SJ-410, use the attache case as well.
■ Standard accessories that can be stored
The following standard accessories can be stored in the attache case.
• Display unit (The touch pen can be stored in the display unit.)
• Height/tilt adjustment unit (The unit can be stored with the drive unit attached.)
• Drive unit (The unit can be stored with it attached to the height/tilt adjustment unit.)
• Precision roughness specimen
• AC adapter
• Power cord
• Printer paper: 1 roll (Take out 1 roll from a 5-roll bag before storing.)
• AP case (The detector, driver, and Allen wrench are stored.)
■ Storing position in the attache case
Store each standard accessory to the position shown in the following figure.
To Next Page
Loading...
