Mitutoyo SURFTEST SJ-410 - Switching Calculation Results Screen; Switching the Calculation Results Display Screen

14.3 Switching Calculation Results screen
14.3.1 Switching the calculation results display screen
The display can be set up to display multiple numbers of parameter on one screen, or to
display the evaluation profile.
■ Operating procedure (Refer to
14.2 "■ Accessing the Screen Change screen".)
Home screen to Main Menu ⇒
Screen Change screen
1 Touch .
Calculation Result Display Setup screen
2 Touch the display setting on the Calculation Results screen.
The following table shows the setup item and content of the setup
screen.
Description
Setup item
Display parameters
1-column
display
1
4-column
display
4
Waveform
display
1
Trace display 1
3 Touch .
Screen Change screen
¾ The set item appears on the Screen Change screen.
TIP
• For information about display after setup has been
completed, refer to "
14.1 Screen Display" (page 14-1).
• Touch
[Initialize] to reset all the settings to their
initial values.
No. 99MBB765A
14-4