12.3 Setting the Conditions for Statistical Measurement
Set the evaluating and measurement conditions for the statistical measurement.
IMPORTANT
• When the statistical measurement is started, you cannot modify the statistical
measurement conditions. Make sure to modify them before performing measurement.
Or, delete all the statistical data before modifying the condition settings.
■ Operating procedure (Refer to
12.2 "■ Accessing the Statistical Menu screen".)
Home screen to Main Menu ⇒ ⇒
Statistical Menu screen
1 Touch .
Statistical Measurement Condition
Setup screen
2 Touch / to display the statistical measurement condition
setup item to be set.
3 Touch the item to be set, and set the statistical measurement
conditions.
TIP
• Up to three parameters can be set as the statistical
measurement conditions.
No. 99MBB765A
12-4
To Next Page
Loading...
