19.5 XYZ Adjustment Table
When measurement is performed along the ridge line of a cylindrical object, accurate
setting is required so that the axis of the cylindrical object becomes horizontal to the
direction of measurement. This setting, considered to be difficult, is called “axial leveling”.
With the XYZ adjustment table, an optional accessory, this type of setting can be
completed easily and shortly by simple operation.
The XYZ adjustment unit supports the DAT function of this product.
For information about the operation procedure, refer to "15.6 Adjustment using the XYZ
Adjustment Table" (page 15-16).
No. 99MBB765A
19-22
To Next Page
Loading...
