Mitutoyo SURFTEST SJ-410 - Operating Environment Setup

No. 99MBB765A
13-1
13 OPERATING
ENVIRONMENT SETUP
Setting up the basic operating environment of this instrument allows
you to use its functions effectively.
You can set the following functions in the operating environment setup.
• Date/Time ：Date and time, and their display methods
• Data Output ：
Functions of the key
• Print Setup ：Print items and profile magnification
• Select Language ：Display language
• Calibration ：Calibration
• Switch Unit ：Switches between millimeters and inches for the unit of
measurement (fixed to millimeters when the language is
Japanese).
• Decimal Point ：Period or comma to use as the decimal point
• Sound setting ：Type and volume of indicator sounds
• Function Restriction ：Restrict the setting of functions (password protection)
• SD card ：SD card formatting and backup
• Timer Setting ：Time and ON/OFF for the auto-sleep and self-timer function
• PC Communication ：RS-232C communication conditions
• Detector position ：Detector position confirmation screen (maintenance function)
• LCD or Key Test ：Check the LCD display and key operation (maintenance
function)
• Touch panel ：Calibration of the touch panel (maintenance function)
• Stylus selection ：Stylus to be used
• Reset To Default ：Reset the instrument to factory default settings
• Version ：Confirm the version of the SJ-410's calculation display
13