3.3 Attaching and Detaching the Drive Unit and
Detector
3.3.1 Attaching and detaching the detector
The detector can be detached from the drive unit. After completing a measurement task
with the SJ-410, detach the detector from the drive unit and store it in a safe place to
prevent damage caused by such as a blow, etc.
• Turn off the drive unit before you attach or detach the detector. Attaching or detaching
the detector while the drive unit is on can result in damage to the unit.
• Attach and detach the detector when the drive unit is at the origin point position. If the
drive unit is not at the origin point position, attaching or detaching the detector can be
difficult and might also damage the unit.
• The detector is a high-precision part. Handle the detector with sufficient care to avoid
dropping it or hitting it against other objects.
To Next Page
Loading...
