Mitutoyo SURFTEST SJ-410 - Setting the Calibration Method

No. 99MBB765A
6-12
6.4.1 Setting the calibration method
This section explains how to set the calibration method.
■ Operating procedure (Refer to 6.2 "■ Accessing the Calibration Menu screen".)
Home screen to Main Menu ⇒ ⇒
Calibration Menu screen
1
Touch on the Calibration Menu screen.
Calibration Conditions screen
2
Touch .
Calibration Method Setup screen
3
Touch the desired calibration method.
Calibration Conditions screen
4
Touch .

The selected calibration method is displayed on the
Calibration Conditions screen.