Mitutoyo SURFTEST SJ-410 - Removing the SD Card

3. SETTING UP THE SJ-410
No. 99MBB765A
3-23
4 Attach the protection cover.
Attaching the protection cover
5 Turn the SJ-410 on, and confirm that the SD mark is displayed on the calculation
results screen.
3.8.2 Removing the SD card
1 Turn the display unit off.
2 Remove the protection cover from the right side of the display unit.
3 Push the SD card.
➢ The SD card pops part of the way out of the slot.
4 Pull the SD card the rest of the way out of the slot.
5 Attach the protection cover.