Mitutoyo SURFTEST SJ-410 - Setting the Returning Speed

7.5.2 Setting the returning speed
Sets the speed to return to the measurement starting position automatically when a
measurement is completed.
■ Operating procedure (Refer to
7.2 “■ Accessing the Evaluating Condition Menu screen”)
Home screen to Main Menu ⇒ ⇒
Measurement Conditions Menu screen
1 Touch on the Measurement Condition Menu
screen.
2 Touch a roughness standard to use, and touch .
Returning Speed Setup screen
TIP
• When is selected, travel speed is
the same as the measuring speed.
Measurement Conditions Menu screen
¾ The selected returning speed is displayed on the
Measurement Condition Menu screen.
No. 99MBB765A
7-50