Mitutoyo SURFTEST SJ-410 - Displaying and Analyzing the Evaluation Profiles and Graphs

No. 99MBB765A
16-1
16 DISPLAYING AND ANALYZING
THE EVALUATION PROFILES
AND GRAPHS
The SJ-410 can display and analyze the evaluation profiles and
BAC/ADC graphs.
This product can perform the following two types of waveform analysis:
• Analyze graph: Coordinate difference, step, step size, and step area of the waveform
can be easily obtained and displayed.
• Graph: Coordinate difference of the BAC graph and the coordinate on the ADC graph
can be displayed.
TIP
• With this product, two types of evaluating conditions can be set for calculation.
• The evaluating conditions can be set on the "A Evaluating Condition Setup screen" and
"B Evaluating Condition Setup screen".
• On the B Evaluating Condition Setup screen,
/ switching button is provided.
When set to
, calculation is not performed with the B evaluating conditions.
The procedures in this section are based on the A evaluating conditions. To analyze with
the B evaluating conditions, display the B evaluating conditions on the Evaluation Profile
screen or Graph screen. You can switch the graph display on the Analyze Graph screens.
16